CAD Designer and Data Management Specialist

Remote

Temporary

Experienced

Remote job - must live and work in United States

We are seeking a highly skilled CAD Designer / Design Engineering Specialist to join our spacecraft test engineering team. This role focuses on creating detailed designs and documentation for fluid, thermal, and electrical subsystems, as well as supporting test architecture development and measurement analysis tools. You will collaborate with engineers to ensure designs meet performance, safety, and quality standards for spacecraft ground and test systems.

Key Responsibilities
CAD & Design Engineering Services
Develop detailed 3D models for vacuum systems, fluid subsystems, and support equipment. Create 2D drawings and Piping & Instrumentation Diagrams (P&IDs) for fluid, thermal, and electrical subsystems. Finalize Bills of Material (BOM) and Master Equipment Lists (MEL) for subsystem designs. Design templates and stencils for P&IDs in compliance with company standards.
Fluid Systems & Test Engineering
Define and finalize architecture for fluid subsystems (e.g., fluid heaters, valve cyclers). Create electrical/wiring diagrams and P&IDs for test systems. Prepare BOMs/MELs and write user guides/tutorials for subsystem operation. Maintain and update engineering wikis, including equipment descriptions, operational guidelines, and documentation links.
Measurement Uncertainty Analysis
Develop tools for measurement uncertainty analysis, including user-friendly spreadsheets. Provide sensor and instrumentation selection options for DAQ systems. Perform uncertainty analysis for new measurement systems and ensure intuitive user interfaces.

Qualifications
Education: Bachelor’s degree in mechanical engineering, aerospace engineering, or related field (or equivalent experience), and 5-10 years of related experience.

Experience:
Proficiency in CAD software (e.g., Creo, CATIA, NX). Visio experience preferred.
Experience with P&IDs, fluid systems, and electrical diagrams.
Familiarity with BOM/MEL preparation and engineering documentation standards. Excel proficiency

Skills:
Strong understanding of fluid, thermal, and electrical subsystems.
Ability to create clear, user-friendly documentation and tools.
Knowledge of measurement uncertainty principles and data acquisition systems.

Preferred:
Experience in spacecraft or aerospace test engineering environments.
Familiarity with vacuum systems and thermal control hardware.

Apply for this position

Required*

First Name*

Last Name*

Email Address*

Phone*

Address

Resume*

We've received your resume. Click here to update it.

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

Because our clients deal with sensitive government data, US Citizenship is a requirement for the position. Do you qualify for this requirement?*

Will you now or in the future require MORI Associates to commence (sponsor) an immigration case in order to employ you (for example, H-1B or other employment-based immigration case)? This is sometimes called sponsorship for an employment-based visa status.*

Have you ever worked for MORI Associates before?*

If yes, when did you leave?

Did you have an Interview for a position at MORI?*

Have you ever been discharged or forced to resign from any previous place of employment?*

What date are you available for employment?*

Are you currently employed?*

What is your desired salary?*

Is there anything else you'd like us to know about you?

Do you have any active security clearances? YesNo

The following questions are entirely optional.

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Gender

Race/Ethnicity

Invitation for Job Applicants to Self-Identify as a U.S. Veteran

A “disabled veteran” is one of the following:
- a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
- a person who was discharged or released from active duty because of a service-connected disability.
A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Veteran status

I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER

Voluntary Self-Identification of Disability

Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury

Please check one of the boxes below:

YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Name	Date

Human Check*

Submit Application

Thanks for visiting our Career Page. Please review our open positions and apply to the positions that match your qualifications.

CAD Designer and Data Management Specialist

Apply for this position